Address
Form of workCandour Talent have an exciting oppertunity for a CNC Milling Machine Programmer - Setter / Operator for a client in the Merthyr areaJob DescriptionMust have experience in Haas and or Fanuc Control Milling Machines.Must Be able to Square / Clock Vices and Fixtures.Must be able to set part Datums using Probe / Wobble Bar etc.Must be able to understand tooling needed to produce required part finishes and features, load tooling and set Machine Tool Length Offsets.Must be able to understand G&M Code programming and make changes where necessary to achieve required part dimensions.Must be able to read and understand Engineering Drawings and tollerances.Must be able to use measuring equipment to check and maintain correct part dimensions and tollerances.The candidate will be responsible for setting and maintaining 8 CNC Milling machines, (6 Haas control & 2 Fanuc control).They will also manage a team of operators, provide training to the operators, carry out Quality control for the machines / operators and be responsible for the day to day running and organisation of production, operating machines themselves when and where required.Rate of pay will depend on experience and amount of training required, but £18.00 - £25.00hr negotiable with increase for right person.Working Hours are 7.00am - 4.30pm, Monday - Thursday.2 x 15min breaks unpaid, gives a basic 36hr week.Role would be Temp - Perm to ensure the candidate is able to perform in this role.IND2Due to the high volume of enquiries that we receive, we are not always able to respond to all CV's. If you have not received a response within two weeks of applying, please assume your application has been unsuccessful. Good Luck with your application and we look forward to receiving your CV
